Technology-Leading Manufacturer Of Industrial Automation Safety Sensors

Home / All / Safety Products / Laser Distance Displacement Sensor / GFL-Z Series /

GFL-Z100NM | Inductive Distance Sensor | DADISICK

GFL-Z100NM | Inductive Distance Sensor | DADISICK
GFL-Z100NM | Inductive Distance Sensor | DADISICKGFL-Z100NM | Inductive Distance Sensor | DADISICKGFL-Z100NM | Inductive Distance Sensor | DADISICKGFL-Z100NM | Inductive Distance Sensor | DADISICKGFL-Z100NM | Inductive Distance Sensor | DADISICK

GFL-Z100NM | Inductive Distance Sensor | DADISICK

CategoriesGFL-Z Series
BrandDADISICK
ModelGFL-Z series | GFL-Z100NM
Response time:Up to 1.5ms
Output typeAnalog
Measuring center distance100mm
Measuring range±35mm
Repeatability70μm
Supply voltage12~24V DC±10%, pulsation P-P10%
Update TimeJun 21,2024
Detail Information
Measuring range specification
Species
Measuring 
center 30mm
Measuring 
center 50mm
Measuring 
center 100mm
Measuring 
center 200mm
Measuring
center type 400mm
Model
NPN output

GFL-Z50N
GFL-Z100N
GFL-Z200N
GFL-Z400N
Analog quantity output
GFL-Z30NM
GFL-Z50NM
GFL-Z100NM
GFL-Z200NM
GFL-Z400NM
RS485 communication
GFL-Z30N-RS485
GFL-Z50N-RS485
GFL-Z100N-RS485
GFL-Z200N-RS485
GFL-Z400N-RS485
Measuring center distance
30mm
50mm
100mm
200mm
400mm
Measuring range
±5mm
±15mm
±35mm
±80mm
±200mm
Repeatability
10μm
30μm
70μm
200μm
400μm(Measuring distance200~400mm)
800μm(Measuring distance400~600mm)
Straightness
±0.1%F.S.
±0.2%F.S.
±0.2%F.S.(Measuring distance200~400mm)
±0.2%F.S.(Measuring distance400~600mm)
Temperature characteristic
0.03%F.S./℃
illuminant
Red semiconductor laser Class 2
Maximum output :1mW, light beam 
wavelength :655nm
Beam diameter
About φ50μm
About φ70μm
Aboutφ120μm 
About φ300μm
About φ500μm
Supply voltage
12~24V DC±10%, pulsation P-P10%
Current consumption
Below 40mA (24V DC supply voltage), below 60mA (12VDC supply voltage)
Control output
<NPN output type >
NPN open collector transistor
●Maximum in￾ow current :50mA
●Applied voltage :30V DC below (control output -0∨)
●Residual voltage: less than 1.5V (in￾ow current 50mA)
●Leakage current: below 0.1mA
Output action
ON in light/ON in non-light can be switched
Short circuit protection
Equipped (automatic recove￾ type)
Analogoutput
Voltage analog output
(When alert :+5.2V)
Output range :0 to 5V
Output impedance100Ω
-
Output range:0~5V
Output impedance:
100Ω
-
Output range:0~5V
Output impedance:
100Ω
Current analog output
(Ale￾ :0mA)
Output range :4 to 20mA
Load impedance :300Ω or less
-
Output range :4 to 20mA
Load impedance :300Ω or less
-
Output range :4 to 20mA
Load impedance :300Ω or less
Mechanical parameters
Reaction time
1.5ms/5ms/10ms can be switched
External input
NPN No contact input Valid :0V to +12V DC Input impedance: about 10 kΩ
Protective construction
IP60
Degree of fouling
2
Operating ambient temperature
-10℃~+40℃(pay attention to do not condensation, icing), storage :-20℃~+60°C
Ambient humidity
35%~85%RH, storage :35%~85%RH
Use ambient light
Incandescent lamp: the illumination degree of the illuminated su￾ace is less than 3000lx
Service level
Below 2000m
Cable
With 0.15mm 5-core composite cable 2m
Material
Body shell: aluminum casting front cover plate: propylene base
weight
Approx. 35g(without cable), Approx. 85g(with cable)
Applicable specification
Compliance with EMC directive
(Note): When the measurement conditions are not speci￾ed, the use conditions are as follows: power supply voltage :24V DC, 
ambient temperature :+20℃, reaction time :10ms, analog output value of the measurement center distance. Object Object: White paper.
DIMENSION                                                                                                                                                                                           
Dimension of laser sensor for CMOS laser
Accessory installation diagram                                                                                                                                                                  
Accessory installation diagram of GFL-Z series laser displacement sensor working principle
WIRING DIAGRAM                                                                                                                                                                                    
Wiring diagram
Wiring diagram of GFL-Z series CMOS laser sensors
DOCUMENTS & DOWNLOADS                                                                                                                                                                  
CATALOGUE

GFL-Z series laser displacement sensor
GFL-Z Series instructions
3D
GFL-Z series.3D-STP
Title
Sample Content
Title
Sample Content
Review
  • Loading...

Contact DADISICK for Industrial Safety Guide

Dear Visitor, thank you for your interest in DADISICK safety sensors! We are dedicated to providing comprehensive safety solutions for industrial production enterprises. If you have any questions about installation, production safety, or anything else, please feel free to contact us. We are committed to providing you with relevant installation guides, production safety manuals, and customized solutions. Looking forward to working together to build a safer industrial environment!
DADISICK PRODUCT is our brand's in-house developed, manufactured, and sold product line. We are dedicated to providing stable and high-quality products, with a guaranteed order shipment within 2-3 days.
Furthermore, we offer maintenance and replacement services for a variety of safety sensors from different brands. Leveraging our inventory of around 4,000 product lines, our safety technology allows us to swiftly adapt to the technical specifications of each brand, ensuring a 100% fulfillment of our customers' industrial safety procurement needs.

*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.