Home / All / Sensor Products / Safety Light Curtains / Cascade Safety Light Curtain DK-QT4 Series / Cascade Safety Light Curtain | DADISICK | DK-QT4 207-7.5-1545-2BB






Cascade Safety Light Curtain | DADISICK | DK-QT4 207-7.5-1545-2BB
Detail Information
TECHNICAL DATA
|
Light curtain safety barrier standard packaging
|
|||
|
Products series
|
Infrared Safety Light Curtain DK-QT4 series
|
||
|
Safety curtain kit
|
One receiver, one transmitter, two data lines, one right-angle rack, and one t-shaped screw
|
||
|
Safety Certificate
|
TÜV CE, China GB certificate, ISO Certificate UL, TYPE 4
|
||
|
Application
|
Standard industrial environment
|
||
|
Features
|
|||
|
Beam gap
|
7.5mm
|
||
|
Detect accuracy
|
14mm
|
||
|
Quantity of beams
|
207
|
||
|
Operation range
|
1545mm
|
||
Product size | 30mm*30mm*L,L is the length of emitter and receiver. | ||
Detection distance | 30-6000mm | ||
Response time | ≤20ms | ||
|
Mechanical data
|
|||
|
Housing material
|
Housing material
|
||
|
Metal casing
|
Aluminium
|
||
|
Lens front panel
|
Acrylic
|
||
|
Upper and lower cap materials
|
ABS reinforced nylon PA66+30% GF
|
||
|
Synchronization
|
|||
|
Current consumption
|
≤200mA
|
||
|
Output mode
|
2 PNP, with current of 500mA and voltage below 1.5V, polarity, short circuit and over-cutting protection
|
||
|
Output status
|
ON (receiving indicator green light)
|
||
|
Indicator lamp
|
Transmitter: power indicator light (red); receiver: output indicator light on (green), blackout (red)
|
||
Wave length | 850nm | ||
Type of emitter | Infrared light (NIR), invisible | ||
Function available | Automatic reset | ||
Synchronization | Line synchronization | ||
|
Performance data
|
|||
|
Circuit protection
|
Short circuit protection
|
||
|
Voltage protection
|
Overvoltage protection
|
||
|
Supply voltage
|
24VDC,-20...20%
|
||
|
Maximum current consumption
|
150mA
|
||
Fuse | 2A half time interval | ||
|
Environmental data
|
|||
|
IP degree of protection
|
IP65
|
||
|
Resistance to ambient light disturbance
|
Incandescent light: illumination of light-receiving surface 3000Lx; Sunlight: illumination of light-receiving surface 10000Lx
|
||
|
Ambient air temperature
|
Operation temperature: - 10~+40 ℃ (but not frozen), storage temperature: - 25 -+55 ℃
|
||
|
Ambient relative humidity
|
Operating: 35~85% RH, storage: 35~95% RH
|
||
|
Output
|
|||
|
Number of safe output circuits (OSSD)
|
2-circuit
|
||
|
Maximum switch voltage
|
18V
|
||
Minimum switch voltage | 2.5V | ||
Standard switching voltage | 22.5V | ||
Output circuit type | DC | ||
Maximum current load | 380mA | ||
Load inductance | 2000 | ||
Load capacity | 0.3 | ||
Maximum residual current | 0.2mA | ||
Standard residual current | 0.002mA | ||
Voltage drop | 1.5V | ||
Safety switch output 1 | Connection pin 4,WHITE OSSD1 | ||
|
Safety switch output 2
|
Connection pin 6, GREEN OSSD2
|
||
Switching type | Transistor 2 PNP | ||
|
Electrical interface
|
|||
|
Composition of interfaces
|
2 (receiver and emitter)
|
||
|
Connector type
|
M12 connector, 9-pin
|
||
Interface material | Copper nickel plating | ||
Plug material | GY384 gray 30P | ||
Available typical conductor section | 0.25mm² | ||
Maximum lenght of cable | 100m | ||
Maximum load of cable | 4.9A | ||
Cable wrapping material | PVC | ||
|
Certificate
|
|||
|
CE TÜV
|
No.E8A 104143 0001 Rev.00
|
||
|
RoHS certification
|
No.BSTDG180811032001CC
|
||
CE Type 4 | No.ICR Polska/VC/HS221222 | ||
UL | No. 4790783741.1-S | ||
ISO | No. HIC180327 GB/T 19001-2016 / ISO 9001:2015 | ||
DIMENSION

DOWNLOADS
3D
TECHNICAL DRAWINGS
Light Curtain Safety Barrier DK-QT4 series Cable Description

signal output selection (actual output of transistor working normally)

NPN output wiring diagram

PNP Output Wiring Diagram

ACCESSORIES
Reliable installation for light curtain, quick and easy adjustment, strong design, suitable for harsh industrial environment.
It can be directly put into the aluminum groove, in the process of installation, it can automatically locate and lock.
Convex groove function:high production efficiency, good heat dissipation, easy to use and maintenance.
The rotating bracket allows the light curtain to rotate around its longitudinal axis and adjust its position
The safety light curtain are fixed on support,and then debug according to the specific situation.
Safety relay for Dadisick Safety Light Curtains
Review
- 加载中···
Related Products
Let us know how we can help you by completing the form below.
Thank you for your inquiry. We will provide you with professional advice and comprehensive support and services throughout the entire life cycle of your sensor or safety system.- Name
- *Title
- *Content
Thank you for sharing this information. Our dealer management team will contact you to discuss further cooperation. Please be assured that your inquiry is important to us and we take your privacy seriously.
DADISICK
Support
Product
- Safety Light Curtain / Safety Grating
- Measuring light curtain
- Vehicle separation light curtain
- Laser Scanning Radar
- Safety Mats
- Safety Edges
- Safety Relays
- Safety Interlock Switches Devices
- Laser Distance Sensor
- Laser Displacement Sensor
- Contact-Type Displacement Sensor
- Ultrasonic sensor
- Photoelectric Sensors
- Color Sensors
- Warehouse and Logistics Automation
- Inductive Proximity Sensors
- Capacitive Proximity Sensors
- Learn More
Solutions
- Area Safety Device
- Safety Trigger Device
- Safety Protection Monitoring
- Safety Signal Processing
- Distance Detection Device
- Object Positioning / Measurement/ Counting
- Obstacle Avoidance Navigation
- Project Custom Design
- Safety Light Curtain
- Multi-Sided Access Protection Light Curtain
- Measuring Light Curtain
- LiDAR Scanner
- Pressure Sensitive Safety Mat
- Ultrasonic Sensor
- Laser Distance Sensor
- Safety Interlock Switch










