 | Photoelectric Sensors Diffuse Reflection DK-GM18 Series | DK-GM18 Series | DK-GM18-30, DK-GM18-50, DK-GM18-100 | Detection range: 30-300mm
Detection range: 50-500mm
Detection range: 80-1000mm
Material: Nickel-copper alloy
Connection type: 3pin/4pin with 2M cable |
 | Photoelectric Sensors Through-beam DK-GM12 Series | DK-GM12 Series | DK-GM12-200,DK- GM12-500 | Detection range: 2000 mm, 5000 mm
Material: Nickel-copper alloy
Connection type: 3pin/4pin with 2M cable |
 | DK-GFJ-GWB | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-GWB | Measuring range: 0-25.4 mm
Resolution: 0.2μm
Accuracy: ≤1.8μm
Response time: 50ms |
| DK-GFJ-WB | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-WB | Measuring range: 0-25.4 mm
Resolution: 0.5μm
Accuracy: ≤3μm
Response time: 50ms |
| DK-GFJ-KB | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-KB | Measuring range: 0-25.4 mm
Resolution: 1μm
Accuracy: ±3μm(≤6μm)
Response time: 50ms |
| DK-GFJ-HB | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-HB | Measuring range: 0-25.4 mm
Resolution: 5μm
Accuracy: ≤10μm
Response time: 50ms |
| DK-GFJ-GWA | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-GWA | Measuring range: 0-12.7 mm
Resolution: 0.2μm
Accuracy: ≤1.4μm
Response time: 50ms |
| DK-GFJ-WA | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-WA | Measuring range: 0-12.7 mm
Resolution: 0.5μm
Accuracy: ≤2μm
Response time: 50ms |
| DK-GFJ-KA | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-KA | Measuring range: 0-12.7 mm
Resolution: 1μm
Accuracy: ±2μm(≤4μm)
Response time: 50ms |
| DK-GFJ-HA | Contact-Type Displacement Sensor | DADISICK | DK-GFJ Series | DK-GFJ-HA | Measuring range: 0-12.7 mm
Resolution: 5μm
Accuracy: ≤10μm
Response time: 50ms |
 | DK-DS-200 | Laser Measurement Sensor | DADISICK | DK-DS Series | DK-DS-200 | Measuring frequency: 1000Hz
Data transmission interface: SSl, Ethernet 100 BASE-TX
Measuring distance: 200m
Measurement accuracy: ±2 mm |
| DK-DS-120 | Laser Measurement Sensor | DADISICK | DK-DS Series | DK-DS-120 | Measuring frequency: 1000Hz
Data transmission interface: SSl, Ethernet 100 BASE-TX
Measuring distance: 120m
Measurement accuracy: ±2 mm |
| DK-DS-80 | Distance Sensor High Precision Sensor | DADISICK | DK-DS Series | DK-DS-80 | Measuring frequency: 1000Hz
Data transmission interface: SSl, Ethernet 100 BASE-TX
Measuring distance: 80m
Measurement accuracy: ±2 mm |
 | Economical Safety Relay DK-LS-3A1B.C with 3NO and 1NC | DK-LS-3A1B.C | DK-LS-3A1B.C is a safety relay suitable for emergency stop, safety door, PNP type safety light curtain signal of various mechanical equipment. It has 3 normally open (NO) safety output contacts and 1 normally closed (NC) auxiliary output contact, and can select single/dual channel operation, manual/automatic reset and short circuit monitoring between channels. It adopts the design of components produced in China, standard housing, convenient wiring and common with mainstream products in the market, with excellent cost performance. |
 | Safety relay DK-LS-2A4S is configurable software safety control module | DK-LS-2A4S | DADISICK DK-LS-2A4S is a configurable safety control module that supports a variety of switch-type safety element inputs (such as emergency stop buttons, safety doors, two-hand buttons, etc.), and supports up to 6 safety element inputs, 2 relay safety outputs, and 4 semiconductor outputs. It can use configuration software to set safety control logic to meet a variety of on-site application requirements. |
 | DK-GFL-Y50IU-485-P Laser measurement distance sensor｜Laser Ranging Sensor｜DADISICK | DK-GFL-Y Series｜DK-GFL-Y50IU-485-P | Output method: PNP+analog+RS485
Resolution: 1mm
Laser type: red semiconductor laser Class II laser 655+10nm<1m
Reaction time: 50-200ms
Measure distance: 0.1-50m |
 | DK-GFL-Y50IU-485-N Laser measurement distance｜Laser Ranging Sensor｜DADISICK | DK-GFL-Y Series｜DK-GFL-Y50IU-485-N | Output method: NPN+analog+RS485
Resolution: 1mm
Laser type: red semiconductor laser Class II laser 655+10nm<1m
Reaction time: 50-200ms
Measure distance: 0.1-50m |
| DK-GFL-Y20IU-485-P Laser measurement distance｜Laser Ranging Sensor｜DADISICK | DK-GFL-Y Series｜DK-GFL-Y20IU-485-P | Output method: PNP+analog+RS485
Resolution: 1mm
Laser type: red semiconductor laser Class II laser 655+10nm<1m
Reaction time: 50-200ms
Measure distance: 0.1-20m |
| DK-GFL-Y20IU-485-N Laser measurement distance｜Laser Ranging Sensor｜DADISICK | DK-GFL-Y Series｜DK-GFL-Y20IU-485-N | Output method: NPN+analog+RS485
Resolution: 1mm
Laser type: red semiconductor laser Class II laser 655+10nm<1m
Reaction time: 50-200ms
Measure distance: 0.1-20m |
| DK-GFL-Y10IU-485-P Laser measurement distance｜Laser Ranging Sensor｜DADISICK | DK-GFL-Y Series｜DK-GFL-Y10IU-485-P | Output method: PNP+analog+RS485
Resolution: 1mm
Laser type: red semiconductor laser Class II laser 655+10nm<1m
Reaction time: 50-200ms
Measure distance: 0.1-10m |
